Settingan Router Summarization

Konfigurasi Router 0
Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.16.10.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int ser 2/0
Router(config-if)#ip add 172.16.5.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#clock rate 64000
Router(config-if)#exit
Router(config)#iproute 192.168.0.0 255.255.252.0 ser 2/0

Router(config)#ip route 192.168.0.0 255.255.252.0 ser 2/0
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 172.16.1.0 255.255.255.0 ser 2/0
Router(config)#exit

%SYS-5-CONFIG_I: Configured from console by console
Router#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up


%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Konfigurasi Router 1
Router>ena
Router#cpnf 
Translating "cpnf"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address

Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.16.1.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int ser2/0
Router(config-if)#ip add 172.16.5.2 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit
Router(config)#exit
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
Router(config)#int ser3/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#clock rate 64000
Router(config-if)#exit
Router(config)#ip route 172.16.10.0 255.255.255.0 ser2/0
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 192.168.2.0 255.255.255.0 ser3/0
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router#
%LINK-5-CHANGED: Interface Serial3/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up


Konfigurasi Router 2
Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int ser2/0
Router(config-if)#ip add 192.168.1.2 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config)#ip route 172.16.0.0 255.255.240.0 ser 2/0
Router(config)#exit
Router#

%SYS-5-CONFIG_I: Configured from console by console

PC0

IP Address: 172.16.10.2

Subnet Mask: 255.255.255.0

Default Gateway: 172.16.10.1

PC1

IP Address: 172.16.1.2

Subnet Mask: 255.255.255.0

Default Gateway: 172.16.1.1

PC2

Ip Address : 192.168.2.2

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.2.1